NEW  CST7 - “Little Sucker” Pouring and Draining Unit 
Click to Buy

$394.99

This is a very versatile piece of equipment that can be used by the smallest basement studio all the way up to the largest commercial shop.
As a pouring unit, you just insert the pickup tube into your slip tank (your present pouring equipment, one of our tanks or as simple as a 5 gallon bucket). Then just fill your molds quickly and easily with the LITTLE SUCKER. Then to drain big molds just insert the tube into the mold and reverse the process.

CST1 - Personal Slip Casting Table - can be countersunk 
Click to Buy

$74.99

21" long, 14-3/4" wide and 9" deep with a 6 gallon capacity. Easy to clean fiberglass tank has seven individually removable 1/2" hardwood rungs. Drain using 3/4" spigot. Compact size and close spaced dowels make this drain-top great for porcelain and small molds.

CST5 - 20 Gal. Stationary Tub Slip Pouring Unit w/faucet nozzle for ceramics Click to Buy

$434.99

This super heavy-duty poly tank is strong and durable. A very practical and inexpensive complete pouring & draining unit. Perfect for both the small studio or the serious hobbyist.

Unit comes complete: 20 gallon tub, attached drain rack with 5 individually removable hardwood rungs and immersion pump with Stainless Steel intake screen.

Overall dimensions 23" wide x 25½" long and 33½" high. Slip is drawn through the stainless steel intake screen then flows out the 3/4" FAUCET type nozzle up to 4 gpm.

CST6 - 15 Gal. Self-Contained Slip Tank and Pump w/faucet nozzle for pouring ceramics Click to Buy

$449.99

This virtually airtight unit is excellent for pouring either porcelain or regular slip. The 16" diameter, round 15 gallon capacity, molded poly tank is mounted on 3 heavy-duty 3" phenolic casters for easy mobility. The 1/3 HP pump has a stainless steel screen and whirlpool mixing action to keep slip constantly agitated. The 6' 3/4" ID pouring hose is reinforced where it leaves the tank to eliminate kinking. The Porta Pour is 25" from floor to the top opening. A plastic lid is fastened to the tank with a chain so it will not be misplaced. The Porta Pour can be used with CST1, CST2 or FET4 drain tops to make a complete pouring and draining unit. Slip is drawn through the stainless steel intake screen then flows out the 3/4" FAUCET type nozzle up to 4 gpm.

FET4 - 4’ End Drain Table Click to Buy

$299.99

Portable Pouring Table has fiberglass top 48" (L) x 23" (W) with 7" drop end drain run on galvanized steel legs. Overall height 30-3/4". Drain end has 3/4" spigot. Works great with CST3, CST4, or CST6.

CST2 - Slip Pouring Table Drainer - (26-1/4" long) can be countersunk Click to Buy

$134.99

26-1/4" long, 23" wide and 8-1/2" deep with a 12 gallon capacity, this easy to clean fiberglass tank has seven individually removable 1" hardwood rungs. This table-top drainer can be optionally drained from either side or end -- 3/4" plug and spigot included. Strong enough for your heaviest molds.

CST3 - 5 Gallon Bucket Pump w/faucet nozzle for pouring slip Click to Buy

$314.99

Circular tank is great for porcelain, ceramics and stoneware--no corners for heavy-bodied slips to hang up in. The new CST3 has a 1/3 HP thermo-protected enclosed top motor with handle. Pump is assembled with stainless steel and non-rusting parts and lifts easily from pail. Sturdy 5 gallon pail has removable half lid to add slip. Pump intakes through stainless steel screen to strain lumps. Jet port in the pump head blend slip to reduce settling. Pump has 3/4" FAUCET type nozzle to control flow rate from a pencil lead thin stream to 4 gpm. Options: Dolly (CDL3)

CDL3 - Dolly for CST3 Click to Buy

$60.99

Heavy-duty four wheeled dolly makes your CST3 pouring unit mobile.

CST4 - 10 Gal. Self-Contained Slip Tank and Pump w/faucet nozzle for pouring ceramics Click to Buy

$369.99

This self-contained 10 gallon tank and pump unit is great for ceramic slip. Pump is powered by 1/3 HP thermo-protected motor with enclosed top. The pump itself is non-rusting aluminum with a stainless steel shaft. The pump has jet port to keep slip circulating. The tank's rounded corners help reduce build up. Half lid on the tank lifts off to add more slip easily. Slip is drawn through the stainless steel intake screen then flows out the 3/4" FAUCET type nozzle up to 4 gpm. Options: Dolly (STD4)

CDL4 - Dolly for CST4 Click to Buy

$60.99

Heavy-duty four wheeled dolly makes your CST4 pouring unit mobile.